| Version: | D |
|---|---|
| Release: | 01B |
| Contr. Agency: | UN |
| Revision: | 2 |
| Date: | 2001-05-15 |
| SOURCE: | D4 Transport (SWG) |
|
For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction |
|
This message also occurs in the following versions of this standard: D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B |
This specification provides the definition of the International transport freight costs and other charges message (IFTFCC) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.
A message specifying freight, handling and transport costs and other related charges between transport service providers and their customers.
The International transport freight costs and other charges message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.
The message will enable the parties involved in transport operations to indicate the various charges and costs. The structure of this information will enable parties to relate the charges and freight costs information received to the original instruction given by other transport messages (e.g. IFTMCS) to allow a one-by-one verification of the statement of charges.
The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat.
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.
A number of generic transport terms are used in this specification, to be described as:
This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.
A service segment starting and uniquely identifying a message. The message type code for the International transport freight costs and other charges message is IFTFCC.
Note: International transport freight costs and other charges messages conforming to this document must contain the following data in segment UNH, composite S009:
| Data element | 0065 | IFTFCC |
| 0052 | D | |
| 0054 | 01B | |
| 0051 | UN |
A segment to indicate the beginning of the message and transmit identifying number.
A segment to indicate the message sender's contact person/department.
A segment to specify the telephone number of the message sender and other communication-related information.
A segment to give an explanation regarding the freight costs charged for in this message, credit facilities, letter of credit and arrangements made by the principal.
A segment to indicate date/times related to the message.
A segment to identify contract and carriage conditions and or services in the context of which all charges in this message apply.
A segment to indicate a document relating to the whole message.
A group of segments to indicate locations relevant to the IFTFCC message.
A segment to indicate a location.
A segment to indicate the date of issue of the IFTFCC message.
A group of segments to identify references related to the IFTFCC message.
A segment to identify a reference, e.g.: Sales contract reference number, Transport contract reference number (bill of lading, air waybill), Shipment reference number, Payee's reference number, Payer's reference number, Creditor's number, Debtor's number, Reference to the applicable General Conditions such as deposited at the Registry of the District Court.
A segment to indicate a date/time related to the reference.
A group of segments to specify amounts resulting from the specification of the charges in this message.
A segment to specify the total amount payable.
A segment to indicate the applied reduction or surcharge percentage details as included in the total amount payable.
A group of segments to calculate the tax amount for a specified tax type and percentage.
A segment specifying the tax type, such as Value Added Tax (VAT).
A segment to indicate the applicable percentage for the tax type.
A segment to specify an amount associated to the tax.
A group of segments to specify a default currency or a rate of exchange applicable to the whole message.
A segment to specify a default currency or rate of exchange.
A segment to specify a date and time relating to a rate of exchange.
A group of segments to specify a charge and the charge calculation methodology, for example related to: - a transport service contract, or - a transport document or contract as referred to on message top level or in this group of segments - the set of voyages or conveyances or flights (in case of among others port charges) or the set of equipments or containers (in case of among others container lease contracts or terminal operations) or the set of consignments specified in the message over a certain period of time as mentioned on message top level. Full details relating to a specific charge can only be specified in this TCC segment group (i.e. in message top level). The charges as detailed in this segment group may be pointed to by one or more other TCC segments elsewhere in the message (i.e. one of the lower levels). When a TCC segment on one of the lower levels of this message is used as a pointer, then only the data element 'Freight and charges item number' (in composite C200) is to be used, with a value that corresponds to the value of the same data element in a TCC segment on message top level.
A segment to specify in text or code the applicable charge, such as trucking costs, haulage costs, sea freight, inland freight destination, issue of transport document, Currency Adjustment Factor (CAF), Bunker Adjustment Factor (BAF), terminal handling charge destination, commission, shed hiring, storage costs, lumpsum.
A segment to indicate a location related to the charge, such as: - 'from' location (starting point) - 'to' location (ending point) - 'on-hire' location (where hiring started) - 'off-hire' location (where hiring ended)
A segment to specify a date or time or period related to the charge, such as: - charged period - 'on-hire' period (i.e. period of hiring) - 'on-hire' date (when hiring started) - 'off-hire' date (when hiring ended)
A segment to identify a reference related to the charge, such as the reference number of the transport service contract, or of the transport document, or the applicable tariff number, or the applicable goods classification number.
A segment to specify an explanation regarding the charge.
A segment to indicate the applicable reduction or surcharge percentage details. This percentage is given here for information purposes and does not form part of a calculation applying to this charge. If a percentage forms a factor in a calculation the PCD segment within the MOA segment group should be used - i.e. the MOA-group within this TCC segment group.
A segment to specify a quantity relevant to calculate the charge, such as: - chargeable number of containers - changeable number of days - chargeable number of exles - chargeable number of packages.
A group of segments to specify the price information of the charge. The amount resulting from the price calculation (i.e. quantity x price) is specified in the MOA segment following this PRI-group, either as an intermediate amount (i.e. with other calculations to follow; resulting amounts to be specified in a repeated MOA segment) or as a total charge amount in invoice currency.
A segment to specify the price for the charge, such as the net price or the gross price (the gross price can be the value of the goods depending on the charge type rate as specified in the related TCC segment).
A segment to indicate the currency in which the price is expressed. An exchange rate can be specified in the CUX segment within the MOA segment group - i.e. the MOA-group within this TCC-group.
A group of segments to specify an amount related to the charge. Only one of the segments or segment groups below the trigger segment MOA can be used. The amount resulting from the calculation within one occurrence of this MOA-group is placed in another occurrence of this MOA-group, which in turn may form the basis for an additional calculation.
A segment to specify an amount related to a charge, such as: - intermediate amount (such as in a pre-defined sequence) - total charge amount in invoice currency.
A group of segments to specify an exchange rate by which an amount can be re-calculated.
A segment to indicate an exchange rate by which an amount can be re-calculated, such as: - from charge currency (i.e. currency in which the charge applies) into reference currency (i.e. currency in which freight is payable) - from reference currency into invoice currency (i.e. currency in which payment will take place).
A segment to specify a date and time related to the exchange rate.
A segment to specify a percentage related to the amount, such as reduction or surcharge percentage applicable to the charge.
A group of segments to specify tax-related information for the charge.
A segment to specify the tax type, such as Value Added Tax (VAT) related to the charge.
A segment to indicate the applicable percentage for the tax type.
A segment group to specify parties related to the IFTFCC message and their banking information.
A segment to identify a party's name, address and function, such as message sender, message receiver, payee, payer, ordering party.
A segment identifying the financial institution such as a bank and account numbers for the payee only.
A segment to indicate the place of registry (for payee).
A group of segments identifying a contact and its communications related to the party.
A segment to identify a person or department within a party.
A segment to identify a communication number of a person or department to whom communication should be directed.
A group of segments to give references relevant to the party.
A segment identifying the reference by its number.
A segment to specify a date/time related to the reference.
A group of segments to specify the terms of transport or delivery, applicable to this whole message.
A segment to specify the terms of transport or delivery.
A segment to specify a location relating to the terms given in the segment TOD.
A group of segments containing information as per original instruction on the charges that will be paid by the party charged in this message.
A segment to indicate which method of payment is required.
A segment to specify the payment currency.
A segment to identify a place relevant to the charge category, such as the 'to' and 'from' locations such as border crossing places between which the charge category applies.
A segment to identify the monetary amount associated with the charges, such as the maximum amount that will be paid.
A group of segments specifying the payment terms applicable to the freight costs and/or other charges charged for in this IFTFCC message.
A segment to identify the applicable payment terms.
A segment to specify the requested payment date and time, discount termination date and time, interest due date and time.
A segment to specify the discount, interest or penalty percentage.
A segment to specify an amount relating to the discount, interest or penalty.
A group of segments describing transport details or voyages or conveyances or flights to which the charges apply or which form a reference for the consignments or goods items charged for in the IFTFCC message.
A segment to indicate information related to a certain stage in a transport.
A segment to point to a charge for which the full details are given in the TCC segment group on message top level. Only the data element 'Freight and charges item number' (in composite C200) is to be used in this case.
A segment to indicate date and times relevant to the transport.
A segment to indicate a location relevant to the transport, such as: Place/port of loading Place/port of discharge Pre-carriage place/port On-carriage place/port
A group of segments giving a reference to the transport details (such as voyage number) and or providing a cross-reference to a charge item (Segment group 6: TCC-group) on message top level.
A segment to specify a reference to the transport details (such as voyage number) or a cross-reference.
A segment to specify a date or time related to the reference.
SG21-SG22-SG23 A group of segments describing goods item details for which the charge(s) applies. The charges can be detailed on message top level (TCC segment group).
A segment to identify a goods item for which transport is undertaken (such as total number of packages). A goods item can be identified by up to three levels of packaging.
A segment to point to a charge for which the full details are given in the TCC segment group on message top level. Only the data element 'Freight and charges item number' (in composite C200) is to be used in this case.
A segment to specify handling instructions relating to the goods item.
A segment to specify a temperature setting for a goods item.
A segment to specify transport movement details for a goods item, such as movement type and carrier or merchant haulage.
A segment to specify a country associated with a goods item, such as country of origin, or country of destination.
A segment to specify shipping marks for this goods item.
A segment to specify article numbers.
A segment to specify processable supplementary information relating to the goods item, such as goods description (which may be in short with respect to the original instruction).
A group of segments to specify measurements applicable to a goods item.
A segment to specify measurements, other than dimensions, applicable to a goods item.
A segment to specify the number of units to each of which the given measurement applies.
A group of segments to specify dimensions applicable to a goods item.
To specify dimensions applicable to a goods item.
A segment to specify the number of units to each of which the given dimension applies.
A group of segments to identify references to a goods item.
A segment to indicate a reference to the goods item and or providing a cross- reference to the applicable charge item on the message level directly above (i.e. top message level).
A segment to indicate date and time relating to the reference.
A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.
A segment to indicate the class of dangerous goods, packing group, etc.
A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.
SG26-SG27 A group of segments describing equipment details for which the charge(s) applies. The charges can be detailed on message top level (TCC segment group).
A segment to identify the equipment and equipment size and type as used in the transport, for example container number, railway wagon number or trailer number.
A segment to point to a charge for which the full details are given in the TCC segment group on message top level. Only the data element 'Freight and charges item number' (in composite C200) is to be used in this case.
A segment to specify the total number of equipment.
A segment to specify transport movement details for the equipment.
A segment to specify measurements, other than dimensions, associated with the equipment, such as equipment weight.
A segment to specify dimensions applicable to the equipment.
A segment to identify seal and seal issuer associated with the equipment.
A segment to identify transport details for the equipment.
A segment to specify processable supplementary information associated with the equipment.
A group of segments giving a reference to the equipment details (such as contract number) and or providing a cross-reference to a charge item on the message level directly above.
A segment to identify the reference by its number, such as lease contract number.
A segment to specify a date related to the reference.
A group of segments to identify the equipment owner.
A segment to identify the equipment owner.
A segment to specify a date and time related to the party.
A group of segments to specify the attached equipment and related number of pieces.
A segment to identify attached or related equipment such as a chassis attached to a container.
A segment to specify the applicable number of pieces of equipment.
SG33-SG34-SG35-SG37-SG42 A group of segments describing the different consignments for which the charges apply. The charges can be detailed on message top level (TCC segment group).
A segment to identify a consignment in relation to a charge.
A segment to point to a charge for which the full details are given in the TCC segment group on message top level. Only the data element 'Freight and charges item number' (in composite C200) is to be used in this case.
A segment to indicate a date and time applying to the consignment.
A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport.
A segment to specify free form or processable supplementary information, such as consignment remarks or any other additional information.
A segment to specify an amount relating to this consignment, such as an amount resulting from the specification of the charges for this consignment.
A group of segments to specify a default currency or exchange rate applicable to this consignment.
A segment to specify a currency or rate of exchange for this consignment.
A segment to specify a date and time related to the rate of exchange.
A group of segments to specify locations and related date(s)/time(s) which apply to the consignment, such as place of transhipment.
A segment to identify a location relating to the consignment.
A segment to indicate date(s) and time(s) relating to the location.
A group of segments giving a reference to the consignment specified and or providing a cross-reference to a charge item on message top level (segment group 6: TCC-group).
A segment to specify a reference which applies to the consignment (such as booking reference) and or a cross-reference to a charge item on message top level (segment group 6:TCC-group).
A segment to indicate a date and time relating to the reference.
A group of segments to specify the terms of delivery or transport, applicable to this consignment.
A segment to specify the applicable terms of delivery or transport.
A segment to specify a location relating to the terms of delivery or transport.
A group of segments to specify a payment instruction relating to this consignment.
A segment to indicate the method of payment applying to this consignment.
A segment to specify the payment currency related to the charge methodology.
A segment to identify a place relevant to the charge category, such as the 'to' and 'from' locations such as border crossing places between which the charge category applies.
A segment to identify the monetary amount associated with the charge.
A group of segments to specify transport details (such as voyage) related to this consignment.
A segment to indicate information related to a certain stage in a transport.
A segment to specify a date and time related to the transport details, such as date and time of departure, date and time of arrival.
A segment to specify a location related to the transport details, such as place or port of departure, place or port of arrival.
A segment to specify a reference to the transport details and or providing a cross-reference to the applicable charge item on CNI-level (segment group 28).
A group of segments to identify a party related to this consignment.
A segment to identify the party's name, address and function.
A group of segments to provide contact information for the party.
A segment to identify a person or department within the party.
A segment to specify a communication number for the person or department.
A segment to identify a reference used by the party.
SG39-SG40-SG41 A group of segments describing goods item details for which the charge(s) of this consignment applies. The charges of this consignment can be detailed on message top level (TCC
A segment to identify a goods item for which transport is undertaken (such as total number of packages). A goods item can be identified by up to three levels of packaging.
A segment to point to a charge for which the full details are given in the TCC segment group on message top level. Only the data element 'Freight and charges item number' (in composite C200) is to be used in this case.
A segment to specify handling instructions relating to the goods item.
A segment to specify a temperature setting for a goods item.
A segment to specify transport movement details for a goods item, such as movement type and carrier or merchant haulage.
A segment to specify a country associated with a goods item, such as country of origin, or country of destination.
A segment to specify shipping marks for this goods item.
A segment to specify article numbers.
A segment to specify processable supplementary information relating to the goods item, such as goods description (which may be in short with respect to the original instruction).
A group of segments to specify measurements applicable to a goods item.
A segment to specify measurements, other than dimensions, applicable to a goods item.
A segment to specify the number of units to each of which the given measurement applies.
A group of segments to specify dimensions applicable to a goods item.
To specify dimensions applicable to a goods item.
A segment to specify the number of units to each of which the given dimension applies.
A group of segments to identify references to a goods item.
A segment to indicate a reference to the goods item (such as order number) and or providing a cross-reference to the applicable charge item on the message level directly above (i.e., CNI-level).
A segment to indicate date and time relating to the reference.
A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.
A segment to indicate the class of dangerous goods, packing group, etc.
A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.
SG44-SG45 A group of segments describing equipment details for which the charge(s) of this consignment applies. The charges of this consignment can be specified on message top level (TCC
A segment to identify the equipment and equipment size and type as used in the transport, for example container number, railway wagon number or trailer number.
A segment to point to a charge for which the full details are given in the TCC segment group on message top level. Only the data element 'Freight and charges item number' (in composite C200) is to be used in this case.
A segment to specify the total number of equipment.
A segment to specify transport movement details for the equipment.
A segment to specify measurements, other than dimensions, associated with the equipment, such as equipment weight.
A segment to specify dimensions applicable to the equipment.
A segment to identify seal and seal issuer associated with the equipment.
A segment to identify transport details for the equipment.
A segment to specify processable supplementary information associated with the equipment.
A group of segments giving a reference to the equipment details (such as contract number) and or providing a cross-reference to a charge item on the message level directly above (i.e., CNI-level).
A segment to identify the reference by its number, such as lease contract number.
A segment to specify a date related to the reference.
A group of segments to identify the equipment owner.
A segment to identify the equipment owner.
A segment to specify a date and time related to the party.
A group of segments to specify the attached equipment and related number of pieces.
A segment to identify attached or related equipment such as a chassis attached to a container.
A segment to specify the applicable number of pieces of equipment.
A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.
| BGM | Beginning of message | |
| CNI | Consignment information | |
| COM | Communication contact | |
| CPI | Charge payment instructions | |
| CTA | Contact information | |
| CUX | Currencies | |
| DGS | Dangerous goods | |
| DIM | Dimensions | |
| DOC | Document/message details | |
| DTM | Date/time/period | |
| EQA | Attached equipment | |
| EQD | Equipment details | |
| EQN | Number of units | |
| FII | Financial institution information | |
| FTX | Free text | |
| GID | Goods item details | |
| HAN | Handling instructions | |
| LOC | Place/location identification | |
| MEA | Measurements | |
| MOA | Monetary amount | |
| NAD | Name and address | |
|
PAT | Payment terms basis |
| PCD | Percentage details | |
| PCI | Package identification | |
| PIA | Additional product id | |
| PRI | Price details | |
| QTY | Quantity | |
| RFF | Reference | |
| SEL | Seal number | |
| TAX | Duty/tax/fee details | |
| TCC | Charge/rate calculations | |
| TDT | Details of transport | |
| TMD | Transport movement details | |
| TMP | Temperature | |
| TOD | Terms of delivery or transport | |
| TPL | Transport placement | |
| TSR | Transport service requirements | |
| UNH | Message header | |
| UNT | Message trailer |
| ├─UNH Message header | ×1 | (M) |
| ├─BGM Beginning of message | ×1 | (M) |
| ├─CTA Contact information | ×1 | (C) |
| ├─COM Communication contact | ×9 | (C) |
| ├─FTX Free text | ×99 | (C) |
| ├─DTM Date/time/period | ×9 | (C) |
| ├─TSR Transport service requirements | ×9 | (C) |
| ├─DOC Document/message details | ×9 | (C) |
| ├─Segment Group 1 | ×9 | (C) |
| │─├─LOC Place/location identification | ×1 | (M) |
| │─└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 2 | ×9 | (C) |
| │─├─RFF Reference | ×1 | (M) |
| │─└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 3 | ×99 | (C) |
| │─├─MOA Monetary amount | ×1 | (M) |
| │─└─PCD Percentage details | ×1 | (C) |
| ├─Segment Group 4 | ×9 | (C) |
| │─├─TAX Duty/tax/fee details | ×1 | (M) |
| │─├─PCD Percentage details | ×1 | (C) |
| │─└─MOA Monetary amount | ×2 | (C) |
| ├─Segment Group 5 | ×9 | (C) |
| │─├─CUX Currencies | ×1 | (M) |
| │─└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 6 | ×999 | (C) |
| │─├─TCC Charge/rate calculations | ×1 | (M) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─PCD Percentage details | ×9 | (C) |
| │─├─QTY Quantity | ×9 | (C) |
| │─├─Segment Group 7 | ×9 | (C) |
| │─│─├─PRI Price details | ×1 | (M) |
| │─│─└─CUX Currencies | ×9 | (C) |
| │─└─Segment Group 8 | ×9 | (C) |
| │───├─MOA Monetary amount | ×1 | (M) |
| │───├─Segment Group 9 | ×1 | (C) |
| │───│─├─CUX Currencies | ×1 | (M) |
| │───│─└─DTM Date/time/period | ×1 | (C) |
| │───├─PCD Percentage details | ×1 | (C) |
| │───└─Segment Group 10 | ×1 | (C) |
| │─────├─TAX Duty/tax/fee details | ×1 | (M) |
| │─────└─PCD Percentage details | ×1 | (C) |
| ├─Segment Group 11 | ×99 | (C) |
| │─├─NAD Name and address | ×1 | (M) |
| │─├─FII Financial institution information | ×9 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─Segment Group 12 | ×9 | (C) |
| │─│─├─CTA Contact information | ×1 | (M) |
| │─│─└─COM Communication contact | ×9 | (C) |
| │─└─Segment Group 13 | ×9 | (C) |
| │───├─RFF Reference | ×1 | (M) |
| │───└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 14 | ×5 | (C) |
| │─├─TOD Terms of delivery or transport | ×1 | (M) |
| │─└─LOC Place/location identification | ×2 | (C) |
| ├─Segment Group 15 | ×9 | (C) |
| │─├─CPI Charge payment instructions | ×1 | (M) |
| │─├─CUX Currencies | ×1 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─└─MOA Monetary amount | ×9 | (C) |
| ├─Segment Group 16 | ×5 | (C) |
| │─├─PAT Payment terms basis | ×1 | (M) |
| │─├─DTM Date/time/period | ×5 | (C) |
| │─├─PCD Percentage details | ×1 | (C) |
| │─└─MOA Monetary amount | ×1 | (C) |
| ├─Segment Group 17 | ×99 | (C) |
| │─├─TDT Details of transport | ×1 | (M) |
| │─├─TCC Charge/rate calculations | ×99 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─└─Segment Group 18 | ×9 | (C) |
| │───├─RFF Reference | ×1 | (M) |
| │───└─DTM Date/time/period | ×1 | (C) |
| ├─Segment Group 19 | ×99 | (C) |
| │─├─GID Goods item details | ×1 | (M) |
| │─├─TCC Charge/rate calculations | ×99 | (C) |
| │─├─HAN Handling instructions | ×1 | (C) |
| │─├─TMP Temperature | ×1 | (C) |
| │─├─TMD Transport movement details | ×1 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─PCI Package identification | ×9 | (C) |
| │─├─PIA Additional product id | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─Segment Group 20 | ×9 | (C) |
| │─│─├─MEA Measurements | ×1 | (M) |
| │─│─└─EQN Number of units | ×1 | (C) |
| │─├─Segment Group 21 | ×9 | (C) |
| │─│─├─DIM Dimensions | ×1 | (M) |
| │─│─└─EQN Number of units | ×1 | (C) |
| │─├─Segment Group 22 | ×9 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×1 | (C) |
| │─└─Segment Group 23 | ×9 | (C) |
| │───├─DGS Dangerous goods | ×1 | (M) |
| │───└─FTX Free text | ×1 | (C) |
| ├─Segment Group 24 | ×999 | (C) |
| │─├─EQD Equipment details | ×1 | (M) |
| │─├─TCC Charge/rate calculations | ×99 | (C) |
| │─├─EQN Number of units | ×1 | (C) |
| │─├─TMD Transport movement details | ×1 | (C) |
| │─├─MEA Measurements | ×9 | (C) |
| │─├─DIM Dimensions | ×9 | (C) |
| │─├─SEL Seal number | ×99 | (C) |
| │─├─TPL Transport placement | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─Segment Group 25 | ×9 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×9 | (C) |
| │─├─Segment Group 26 | ×9 | (C) |
| │─│─├─NAD Name and address | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×1 | (C) |
| │─└─Segment Group 27 | ×99 | (C) |
| │───├─EQA Attached equipment | ×1 | (M) |
| │───└─EQN Number of units | ×1 | (C) |
| ├─Segment Group 28 | ×99 | (C) |
| │─├─CNI Consignment information | ×1 | (M) |
| │─├─TCC Charge/rate calculations | ×99 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─TSR Transport service requirements | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─MOA Monetary amount | ×9 | (C) |
| │─├─Segment Group 29 | ×9 | (C) |
| │─│─├─CUX Currencies | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×9 | (C) |
| │─├─Segment Group 30 | ×9 | (C) |
| │─│─├─LOC Place/location identification | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×9 | (C) |
| │─├─Segment Group 31 | ×9 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×9 | (C) |
| │─├─Segment Group 32 | ×5 | (C) |
| │─│─├─TOD Terms of delivery or transport | ×1 | (M) |
| │─│─└─LOC Place/location identification | ×2 | (C) |
| │─├─Segment Group 33 | ×9 | (C) |
| │─│─├─CPI Charge payment instructions | ×1 | (M) |
| │─│─├─CUX Currencies | ×1 | (C) |
| │─│─├─LOC Place/location identification | ×9 | (C) |
| │─│─└─MOA Monetary amount | ×9 | (C) |
| │─├─Segment Group 34 | ×99 | (C) |
| │─│─├─TDT Details of transport | ×1 | (M) |
| │─│─├─DTM Date/time/period | ×9 | (C) |
| │─│─├─LOC Place/location identification | ×9 | (C) |
| │─│─└─RFF Reference | ×9 | (C) |
| │─├─Segment Group 35 | ×99 | (C) |
| │─│─├─NAD Name and address | ×1 | (M) |
| │─│─├─Segment Group 36 | ×9 | (C) |
| │─│─│─├─CTA Contact information | ×1 | (M) |
| │─│─│─└─COM Communication contact | ×9 | (C) |
| │─│─└─RFF Reference | ×9 | (C) |
| │─├─Segment Group 37 | ×99 | (C) |
| │─│─├─GID Goods item details | ×1 | (M) |
| │─│─├─TCC Charge/rate calculations | ×99 | (C) |
| │─│─├─HAN Handling instructions | ×1 | (C) |
| │─│─├─TMP Temperature | ×1 | (C) |
| │─│─├─TMD Transport movement details | ×1 | (C) |
| │─│─├─LOC Place/location identification | ×9 | (C) |
| │─│─├─PCI Package identification | ×9 | (C) |
| │─│─├─PIA Additional product id | ×9 | (C) |
| │─│─├─FTX Free text | ×9 | (C) |
| │─│─├─Segment Group 38 | ×9 | (C) |
| │─│─│─├─MEA Measurements | ×1 | (M) |
| │─│─│─└─EQN Number of units | ×1 | (C) |
| │─│─├─Segment Group 39 | ×9 | (C) |
| │─│─│─├─DIM Dimensions | ×1 | (M) |
| │─│─│─└─EQN Number of units | ×1 | (C) |
| │─│─├─Segment Group 40 | ×9 | (C) |
| │─│─│─├─RFF Reference | ×1 | (M) |
| │─│─│─└─DTM Date/time/period | ×1 | (C) |
| │─│─└─Segment Group 41 | ×9 | (C) |
| │─│───├─DGS Dangerous goods | ×1 | (M) |
| │─│───└─FTX Free text | ×1 | (C) |
| │─└─Segment Group 42 | ×999 | (C) |
| │───├─EQD Equipment details | ×1 | (M) |
| │───├─TCC Charge/rate calculations | ×99 | (C) |
| │───├─EQN Number of units | ×1 | (C) |
| │───├─TMD Transport movement details | ×1 | (C) |
| │───├─MEA Measurements | ×9 | (C) |
| │───├─DIM Dimensions | ×9 | (C) |
| │───├─SEL Seal number | ×99 | (C) |
| │───├─TPL Transport placement | ×9 | (C) |
| │───├─FTX Free text | ×9 | (C) |
| │───├─Segment Group 43 | ×9 | (C) |
| │───│─├─RFF Reference | ×1 | (M) |
| │───│─└─DTM Date/time/period | ×9 | (C) |
| │───├─Segment Group 44 | ×9 | (C) |
| │───│─├─NAD Name and address | ×1 | (M) |
| │───│─└─DTM Date/time/period | ×1 | (C) |
| │───└─Segment Group 45 | ×99 | (C) |
| │─────├─EQA Attached equipment | ×1 | (M) |
| │─────└─EQN Number of units | ×1 | (C) |
| └─UNT Message trailer | ×1 | (M) |
