| Version: | D |
|---|---|
| Release: | 04B |
| Contr. Agency: | UN |
| Revision: | 2 |
| Date: | 2004-11-23 |
| SOURCE: | TBG8 Insurance |
|
For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction |
|
This message also occurs in the following versions of this standard: D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B |
This specification provides the definition of the Insurance claim assessment and reporting message (ICASRP) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.
The Insurance claim assessment and reporting message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.
The Insurance claim assessment and reporting message is exchanged between all parties involved in the claims handling process. Claims handling parties include insurers, intermediaries, assessors and repairers. The claims handling process includes the functions, claim notification, assessment request, assessment report, repair estimate, repair authorisation, claim progress reporting.
The Insurance claim assessment and reporting message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.
Each message contains information relating to one insurance claim against one policy only, although any related claims may be referenced. A claim results from one incident, although that incident may have many sub-incidents. For example the claim may result from storm damage, but that may include lightning strike, flood damage and fire damage caused by electrical short circuit. The message supports all types of claims, including motor, household, commercial. The specific type of object which is the subject of the claim is specified within the risk object details group. A generic 'component' group is positioned below the risk object and is used to describe information relating to the risk object. The actual content of the component group will vary depending on the type of risk object, for example if the object is a motor vehicle the components may include modifications and security devices, but if the object is a house the components may include construction and occupancy. The type of component is specified by a code within the component details segment which identifies a type of entity from the insurance data model. The re-usable component group is also used elsewhere in the message to provide the flexibility needed to describe the other main information blocks, such as incident, party and insurance history. Inside each of the segment groups an identity segment is positioned to allow the provision of unique identifiers for each instance of the group. The identifiers may then appear inside other segment groups as 'keys' that provide a relational link e.g. linking each object to its appropriate insurance cover, linking parties to documents or linking child objects to their parent object. Some of the information in the message appears twice, in a 'before' and 'after' state. The insurer will provide information on cover as defined in the policy, together with any conditions and limitations for example there may be a minimum and maximum excess amount written into the policy. The information is then used by the person assessing the claim to derive the covers and amounts that apply to the circumstances of the claim e.g. the amount of excess to be paid on this claim
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.
This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.
A service segment starting and uniquely identifying a message. The message type code for the Insurance claim assessment and reporting message is ICASRP.
Note: Insurance claim assessment and reporting messages conforming to this document must contain the following data in segment UNH, composite S009:
| Data element | 0065 | ICASRP |
| 0052 | D | |
| 0054 | 04B | |
| 0051 | UN |
To specify the function of the message, such as claim notification, assessment request, assessment report.
To specify the type of transaction within the specified message function.
To specify the currency of the transaction.
To specify dates related to the transaction, such as the date processed.
To provide the response to coded questions related to the transaction.
To provide additional text information related to the transaction, such as transaction description.
A group of segments to specify parties related to the transaction communication together with any related references.
To specify one party related to the business transaction, such as message originator, ultimate recipient and software supplier.
A group of segments to identify components of software used in the application system that created the business transaction contained within this message, together with any relevant dates.
To provide a reference that identifies one software component provided by the software supplier together with the version of the software.
To specify dates related to the software component, such as effective date and date applied to system.
A group of segments to describe an event or incident that gave rise to the claim as well as the claim itself. One claim results from one major incident, but there may be many sub-incidents that need to be defined, e.g. during a storm there may be lightning damage, flood damage and fire damage caused by electrical short circuit etc.
To identify and describe one event or incident related to the claim.
To provide identification numbers for the incident which may be used to link the incident to specific items of damage.
To specify coded attributes relating to the incident, such as incident scale.
To specify dates relating to the incident, such as incident date or start and end date when the incident occurred over a period of time.
To specify references relating to the incident such as intermediary's claim reference, insurer's claim number.
To specify percentages relating to the incident such as percentage of responsibility.
To specify the response to coded questions about the incident.
To specify quantities relating to the incident, such as number of injured parties, number of witnesses.
To provide text information about the incident, such as incident description.
A group of segments to specify and describe the costs and charges relating to the incident.
To specify one type of cost or charge relating to the incident.
To specify one type of cost or charge relating to the incident.
To specify coded attributes relating to the cost charge, such as method of calculation.
To specify monetary amounts for the cost or charge, such as amount including tax, discount amount.
To specify percentages relating to the cost or charge, such as tax percentage.
To provide text information about the cost or charge, such as explanation of cost or charge.
A group of segments to identify and describe contributions and/or recoveries relating to a cost or charge, and to identify who the recovery is to be made against.
To identify one contribution or recovery relating to the cost or charge.
To specify the identity number of a party to whom this contribution or recovery applies.
To provide coded attributes relating to the contribution or recovery, such as contribution or recovery status.
To specify monetary amounts relating to the contribution or recovery, such as amount of contribution to the cost charge.
To specify percentages relating to the contribution or recovery, such as percentage of contribution to the cost charge.
To specify references for the contribution or recovery.
To provide text information about the contribution or recovery.
RFF-FTX-SG7 To provide text information about the contribution or
Provides a coded identification of one type of claim or incident component, such as policy cover, addresses.
To reference the object or party to which the cover applies.
To specify a geographic limit on a policy cover, which may be expressed as a location, an address or a country or the address(es) of the incident.
To specify coded attributes related to the cover component, such as cover type, usage.
To specify communication numbers for the address.
To specify dates related to the cover, such as cover inception date, end date.
To specify monetary amounts related to the cover, such as cover limit.
To specify percentages related to the cover, such as cover index.
To specify the response to coded questions concerning the cover.
To specify quantities related to the cover, such as number of claims allowed.
To specify references related to the cover.
To specify text information about the cover, such as cover description, usage description.
A group of segments to describe the components relating to the cover which are used to calculate the claim.
To specify one type of component used in the claim calculation, such as excess, cover condition.
To specify coded attributes related to the claim calculation component, such as claim calculated by code.
To specify dates relating to the claim calculation, such as condition valid date.
To specify monetary amounts relating to the claim calculation, such as excess amount.
To specify percentages related to the claim calculation component, such as excess percentage.
To specify the response to coded questions about the claim calculation component.
To specify quantities relating to the claim calculation component.
To provide text information about the claim calculation component, such as condition wording.
A group of segments to specify and describe the costs and charges resulting from the claim calculation.
To specify one type of cost or charge relating to the cover.
To reference the object or party that the cost or charge applies to.
To specify coded attributes relating to the claim calculation, such as method of calculation.
To specify monetary amounts for the claim calculation component, such as cost or charge amount, discount amount.
To specify percentages relating to the claim calculation component, such as cost or charge discount percentage.
To provide text information about the claim calculation component, such as explanation of cost or charge.
A group of segments to identify and describe contributions or recoveries relating to a claim calculation component.
To identify one contribution or recovery relating to the claim calculation.
To reference a party to whom this contribution or recovery relates.
To provide coded attributes related to the contribution or recovery, such as contribution or recovery status.
To specify monetary amounts related to the contribution or recovery, such as amount of contribution to the cost charge.
To specify percentages relating to the contribution or recovery, such as percentage of contribution to the cost charge.
To specify references relating to the contribution or recovery.
To provide text information about the contribution or recovery.
A group of segments to identify and describe the policy which is the subject of the claim.
To identify the insurance product specified in the policy.
To provide identification numbers for the policy as specified by the intermediary, insurer and client.
To specify coded attributes related to the policy, such as policy product code, scheme code.
To specify dates related to the policy, such as inception date, expiry date.
To specify monetary amounts related to the policy, such as indemnity limit.
To specify references related to the policy, such as policy number, policy wording version number.
To provide the response to coded questions relating to the policy.
To provide text information related to the policy.
A group of segments to identify and describe external documents relating to the claim. The information within this group describe the characteristics of the document not the content of the document.
To specify one type of document which is external to the message.
To reference a party or object to which the document relates.
To specify coded attributes relating to the document, such as document status code.
To specify addresses relating to the document, such as place of issue.
To specify a link to an external file that is related to the document.
To specify references relating to the document, such as document reference, previous document reference.
To specify dates relating to the document, such as date requested, date received.
To specify monetary amounts relating to the document.
To specify the response to coded questions relating to the document.
To specify quantities relating to the document, such as number of pages, number of copies.
To provide text information about the document, such as document description.
A group of segments to describe parties related to the claim, such as the insured, intermediary, insurer.
To identify one party related to a claim described within this message.
To specify identification numbers for the party which are used to link the party to other entities within the message.
To specify coded attributes related to the party, such as value added tax status code, marital status code.
To specify dates related to the party, such as date of birth, date of death.
To provide measurements relating to the party, such as level of blood alcohol.
To specify references related to the party, such as value added tax registration number.
To provide the response to coded questions about the party.
To specify percentages related to the party, such as party proportion of risk.
To provide text information relating to the party.
QTY-RFF-FTX A group of segments to describe components relating to the party that may be used in validating the claim, such as addresses, employment, convictions, financial account.
Provides a coded identification of one type of input or output component related to the party.
To provide identification numbers for the party component that may be used to link the component to other entities.
To specify address details for a party.
To provide a set of financial account details for a party.
To specify coded attributes relating to the party component, such as offence code, type of blood alcohol test code.
To provide communication details relating to a party component, such as telephone and fax numbers at address.
To specify dates relating to the party component, such as start date at address, length of sentence.
To provide one set of employment details for a party.
To specify monetary amounts relating to the party component, such as fine amount.
To provide the response to coded questions relating to the party component.
To specify quantities relating to the party component, such as total licence penalty points.
To specify references relating to the party component, such as conviction reference, financial account number.
To provide text information relating to the party component, such as offence description, employment description.
QRS-RTE-FTX-SG15-SG17 A group of segments to describe the risk objects that are the subject of the claim.
To identify one risk object that is the subject of the claim.
To provide identification numbers for the risk object that may be used to link the object to other entities within the message, such as cover.
To specify reference numbers for the risk object, such as vehicle identification number, chassis number.
To specify monetary amounts relating to the risk object, such as sum insured, replacement value.
To specify percentages relating to the risk object.
To specify tax/fee details relating to the risk object.
To specify dates relating to the risk object, such as date first registered, date inspected.
To specify a place/location related to the risk object.
To specify coded attributes relating to the risk object, such as body type code, nature of occupancy.
To specify measurements relating to the risk object, such as length, width, floor area.
To specify quantities relating to the risk object, such as number of occupants, number of seats.
To provide the response to coded questions about the risk object.
To specify rate details relating to the risk object.
To provide text descriptions relating to the risk object, such as object description, business usage of building description.
A group of segments to specify and describe the cost and charges relating to the risk object.
To identify one charge or cost related to the risk object. To identify one charge or cost related to the risk object.
To reference a party to whom the charge relates.
To specify coded attributes relating to the cost or charge, such as method of calculation.
To specify monetary amounts relating to the cost or charge, such as tax amount, discount amount.
To specify percentages relating to the cost or charge.
To provide text descriptions relating to the cost or charge.
A group of segments to identify and describe contributions or recoveries relating to the risk object cost or charge.
To identify one contribution or recovery related to the cost or charge.
To reference a party to whom this contribution or recovery relates.
To specify coded attributes relating to the contribution or recovery, such as contribution or recovery status code.
To specify monetary amounts relating to the contribution or recovery, such as contribution or recovery amount.
To specify percentages relating to the contribution or recovery, such as percentage of insurer's responsibility.
To specify references relating to the contribution or recovery.
To provide text descriptions relating to the contribution or recovery.
QRS-QTY-RFF-FTX-SG18-SG20 A group of segments to describe components relating to the risk object and its assessment, such as address, part/task detail, loss/damage, valuation, security, interest.
Provides a coded identification of one type of component related to the risk object.
To provide identification numbers for the risk object component which may be used to link the component to other entities.
To specify addresses relating to the risk object.
To specify coded attributes relating to the risk object component, such as severity of damage code, security device code.
To specify communication numbers for the address, such as telephone, fax numbers.
To specify the damage to the risk object.
To specify dates relating to the risk object component, such as start date at address.
To specify measurements relating to the risk object component.
To specify monetary amounts relating to the risk object component, such as pre-incident value, resultant value.
To specify percentages relating to the risk object component, such as percentage of under insurance, percentage of cost allocation.
To specify the response to coded questions relating to the risk object component.
To specify quantities relating to the risk object component.
To specify references relating to the risk object component.
To provide text information for the risk object component, such as specialist valuation description, explanation of a video image.
A group of segments to identify and describe costs and charges relating to the loss or damage.
To identify one charge relating to the loss or damage.
To reference a party to whom this cost or charge relates.
To specify coded attributes relating to the cost or charge, such as method of calculation.
To specify monetary amounts relating to the cost or charge component, such as tax amount, discount amount.
To specify percentages relating to the cost or charge component, such as cost or charge discount percentage.
To provide text information about the cost or charge component.
A group of segments to identify and describe contribution and recovery details relating to the risk object component cost or charge.
To identify one contribution or recovery component relating to the risk object component cost or charge.
To reference a party to whom this contribution or recovery relates.
To specify coded attributes relating to the contribution or recovery component, such as contribution or recovery status code.
To specify monetary amounts relating to the contribution or recovery component, such as contribution or recovery amount.
To specify percentages relating to the contribution or recovery component, such as percentage of insurer's liability.
To provide references relating to the contribution or recovery component.
To provide text information about the contribution or recovery component.
FTX-SG21 A group of segments to identify and describe part or task details relating to the risk object loss/damage
To identify one part or task that relates to the risk object loss/damage component.
To reference a party that relates to this part or task such as service provider.
To specify coded attributes relating to the part or task item, such as paint system code, category of labour code.
To specify dates relating to the part or task item, such as task/service start date.
To specify measurements relating to the part or task item, such as tyre pressure, tyre tread depth.
To specify percentages relating to the part or task.
To specify the response to coded questions about the part or task item.
To specify quantities relating to the part or task.
To specify references relating to the part or task.
To provide text information relating to the part or task, such as evidence of personal injury.
A group of segments to identify and describe costs and charges relating to a part or task item.
To identify one charge related to the part or task item.
To reference a party to whom this cost or charge relates.
To specify coded attributes relating to the cost or charge, such as method of calculation.
To specify monetary amounts relating to the cost or charge component, such as tax amount, discount amount.
To specify percentages relating to the cost or charge component, such as cost or charge discount percentage.
To provide text information about the cost or charge component.
A group of segments to identify and describe contribution and recovery details related to the risk object component cost or charge.
To identify one contribution or recovery component relating to the risk object cost or charge.
To reference a party to whom this contribution or recovery relates.
To specify coded attributes relating to the contribution or recovery component, such as contribution or recovery status code.
To provide monetary amounts relating to the contribution or recovery component, such as contribution or recovery amount.
To specify percentages relating to the contribution or recovery component, such as percentage of insurer's responsibility.
To specify references relating to the contribution or recovery component.
To provide text information relating to the contribution or recovery component.
A group of segments to identify and describe an action relating to the claim, such as assessment, financial settlement, progress report.
To identify one action related to the claim.
To reference parties related to the claim.
To specify coded attributes relating to the action, such as assessment report type, manner of settlement.
To specify dates related to the action, such as date of report, date inspection to be performed.
To specify monetary amounts related to the action, such as settlement amount.
To provide the response to coded questions about the action.
To specify references related to the action, such as instructor's assessment reference, assessor's assessment reference.
To provide text information about the action, such as progress description, verdict description.
A group of segments to describe the previous insurance history for the risk associated with this claim. The previous insurance is expressed as a sequence of periods of insurance.
Identifies the sequence of this period of previous insurance.
To reference parties related to this period of insurance history.
To specify coded attributes relating to the previous insurance history, such as policy class.
To specify dates relating to the period of insurance history, such as inception date, expiry date.
To specify references relating to the period of previous insurance history, such as policy number.
A group of segments to identify and describe components relating to the period of previous insurance history, such as prior loss.
To identify one prior loss that relates to the period of previous insurance.
To reference party numbers for the prior loss as specified by the intermediary, insurer and client.
To specify coded attributes relating to the prior loss, such as loss type, incident type.
To specify dates relating to the prior loss, such as loss date, settlement date.
To specify monetary amounts relating to the prior loss, such as loss amount.
To specify the response to coded questions relating to the prior loss.
To specify references for the prior loss, such as insurer’s historical claim reference.
To provide free text about the prior loss, such as prior loss description.
A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.
| ADR | Address | |
| ATT | Attribute | |
| BGM | Beginning of message | |
| COD | Component details | |
| COM | Communication contact | |
| COT | Contribution details | |
| CUX | Currencies | |
| DAM | Damage | |
| DOC | Document/message details | |
| DTM | Date/time/period | |
| EFI | External file link identification | |
| EMP | Employment details | |
| EVE | Event | |
| FII | Financial institution information | |
| FTX | Free text | |
| ICD | Insurance cover description | |
| IDE | Identity | |
| IMD | Item description | |
| LOC | Place/location identification | |
| MEA | Measurements | |
| MOA | Monetary amount | |
| PCC | Premium calculation component details | |
| PCD | Percentage details | |
| PNA | Party identification | |
| PRC | Process identification | |
| QRS | Query and response | |
| QTY | Quantity | |
| RFF | Reference | |
| ROD | Risk object type | |
| RTE | Rate details | |
| SEQ | Sequence details | |
| TAX | Duty/tax/fee details | |
| TCC | Charge/rate calculations | |
| UNH | Message header | |
| UNT | Message trailer |
| ├─UNH Message header | ×1 | (M) |
| ├─BGM Beginning of message | ×1 | (M) |
| ├─ATT Attribute | ×9 | (C) |
| ├─CUX Currencies | ×1 | (C) |
| ├─DTM Date/time/period | ×9 | (C) |
| ├─QRS Query and response | ×9 | (C) |
| ├─FTX Free text | ×9 | (C) |
| ├─Segment Group 1 | ×9 | (M) |
| │─├─PNA Party identification | ×1 | (M) |
| │─└─Segment Group 2 | ×9 | (C) |
| │───├─RFF Reference | ×1 | (M) |
| │───└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 3 | ×99 | (M) |
| │─├─EVE Event | ×1 | (M) |
| │─├─IDE Identity | ×9 | (C) |
| │─├─ATT Attribute | ×9 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─PCD Percentage details | ×9 | (C) |
| │─├─QRS Query and response | ×9 | (C) |
| │─├─QTY Quantity | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─Segment Group 4 | ×9 | (C) |
| │─│─├─TCC Charge/rate calculations | ×1 | (M) |
| │─│─├─IDE Identity | ×9 | (C) |
| │─│─├─ATT Attribute | ×9 | (C) |
| │─│─├─MOA Monetary amount | ×9 | (C) |
| │─│─├─PCD Percentage details | ×9 | (C) |
| │─│─├─FTX Free text | ×9 | (C) |
| │─│─└─Segment Group 5 | ×99 | (C) |
| │─│───├─COT Contribution details | ×1 | (M) |
| │─│───├─IDE Identity | ×9 | (C) |
| │─│───├─ATT Attribute | ×9 | (C) |
| │─│───├─MOA Monetary amount | ×9 | (C) |
| │─│───├─PCD Percentage details | ×9 | (C) |
| │─│───├─RFF Reference | ×9 | (C) |
| │─│───└─FTX Free text | ×9 | (C) |
| │─└─Segment Group 6 | ×99 | (C) |
| │───├─COD Component details | ×1 | (M) |
| │───├─IDE Identity | ×9 | (C) |
| │───├─ADR Address | ×1 | (C) |
| │───├─ATT Attribute | ×9 | (C) |
| │───├─COM Communication contact | ×9 | (C) |
| │───├─DTM Date/time/period | ×9 | (C) |
| │───├─MOA Monetary amount | ×9 | (C) |
| │───├─PCD Percentage details | ×9 | (C) |
| │───├─QRS Query and response | ×9 | (C) |
| │───├─QTY Quantity | ×9 | (C) |
| │───├─RFF Reference | ×9 | (C) |
| │───├─FTX Free text | ×9 | (C) |
| │───└─Segment Group 7 | ×999 | (C) |
| │─────├─PCC Premium calculation component details | ×1 | (M) |
| │─────├─ATT Attribute | ×9 | (C) |
| │─────├─DTM Date/time/period | ×9 | (C) |
| │─────├─MOA Monetary amount | ×9 | (C) |
| │─────├─PCD Percentage details | ×9 | (C) |
| │─────├─QRS Query and response | ×9 | (C) |
| │─────├─QTY Quantity | ×9 | (C) |
| │─────├─FTX Free text | ×9 | (C) |
| │─────└─Segment Group 8 | ×99 | (C) |
| │───────├─TCC Charge/rate calculations | ×1 | (M) |
| │───────├─IDE Identity | ×9 | (C) |
| │───────├─ATT Attribute | ×9 | (C) |
| │───────├─MOA Monetary amount | ×9 | (C) |
| │───────├─PCD Percentage details | ×9 | (C) |
| │───────├─FTX Free text | ×9 | (C) |
| │───────└─Segment Group 9 | ×99 | (C) |
| │─────────├─COT Contribution details | ×1 | (M) |
| │─────────├─IDE Identity | ×9 | (C) |
| │─────────├─ATT Attribute | ×9 | (C) |
| │─────────├─MOA Monetary amount | ×9 | (C) |
| │─────────├─PCD Percentage details | ×9 | (C) |
| │─────────├─RFF Reference | ×9 | (C) |
| │─────────└─FTX Free text | ×9 | (C) |
| ├─Segment Group 10 | ×999 | (C) |
| │─├─ICD Insurance cover description | ×1 | (M) |
| │─├─IDE Identity | ×9 | (C) |
| │─├─ATT Attribute | ×9 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─MOA Monetary amount | ×9 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─QRS Query and response | ×9 | (C) |
| │─└─FTX Free text | ×9 | (C) |
| ├─Segment Group 11 | ×99 | (C) |
| │─├─DOC Document/message details | ×1 | (M) |
| │─├─IDE Identity | ×9 | (C) |
| │─├─ATT Attribute | ×9 | (C) |
| │─├─ADR Address | ×9 | (C) |
| │─├─EFI External file link identification | ×1 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─MOA Monetary amount | ×9 | (C) |
| │─├─QRS Query and response | ×9 | (C) |
| │─├─QTY Quantity | ×9 | (C) |
| │─└─FTX Free text | ×9 | (C) |
| ├─Segment Group 12 | ×99 | (M) |
| │─├─PNA Party identification | ×1 | (M) |
| │─├─IDE Identity | ×9 | (C) |
| │─├─ATT Attribute | ×99 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─MEA Measurements | ×9 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─QRS Query and response | ×9 | (C) |
| │─├─PCD Percentage details | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─└─Segment Group 13 | ×99 | (C) |
| │───├─COD Component details | ×1 | (M) |
| │───├─IDE Identity | ×9 | (C) |
| │───├─ADR Address | ×1 | (C) |
| │───├─FII Financial institution information | ×1 | (C) |
| │───├─ATT Attribute | ×9 | (C) |
| │───├─COM Communication contact | ×9 | (C) |
| │───├─DTM Date/time/period | ×9 | (C) |
| │───├─EMP Employment details | ×9 | (C) |
| │───├─MOA Monetary amount | ×9 | (C) |
| │───├─QRS Query and response | ×9 | (C) |
| │───├─QTY Quantity | ×9 | (C) |
| │───├─RFF Reference | ×9 | (C) |
| │───└─FTX Free text | ×9 | (C) |
| ├─Segment Group 14 | ×99 | (M) |
| │─├─ROD Risk object type | ×1 | (M) |
| │─├─IDE Identity | ×9 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─MOA Monetary amount | ×99 | (C) |
| │─├─PCD Percentage details | ×9 | (C) |
| │─├─TAX Duty/tax/fee details | ×1 | (C) |
| │─├─DTM Date/time/period | ×99 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─ATT Attribute | ×99 | (C) |
| │─├─MEA Measurements | ×9 | (C) |
| │─├─QTY Quantity | ×9 | (C) |
| │─├─QRS Query and response | ×99 | (C) |
| │─├─RTE Rate details | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─Segment Group 15 | ×99 | (C) |
| │─│─├─TCC Charge/rate calculations | ×1 | (M) |
| │─│─├─IDE Identity | ×9 | (C) |
| │─│─├─ATT Attribute | ×9 | (C) |
| │─│─├─MOA Monetary amount | ×9 | (C) |
| │─│─├─PCD Percentage details | ×9 | (C) |
| │─│─├─FTX Free text | ×9 | (C) |
| │─│─└─Segment Group 16 | ×99 | (C) |
| │─│───├─COT Contribution details | ×1 | (M) |
| │─│───├─IDE Identity | ×9 | (C) |
| │─│───├─ATT Attribute | ×9 | (C) |
| │─│───├─MOA Monetary amount | ×9 | (C) |
| │─│───├─PCD Percentage details | ×9 | (C) |
| │─│───├─RFF Reference | ×9 | (C) |
| │─│───└─FTX Free text | ×9 | (C) |
| │─└─Segment Group 17 | ×999 | (C) |
| │───├─COD Component details | ×1 | (M) |
| │───├─IDE Identity | ×9 | (C) |
| │───├─ADR Address | ×1 | (C) |
| │───├─ATT Attribute | ×9 | (C) |
| │───├─COM Communication contact | ×9 | (C) |
| │───├─DAM Damage | ×9 | (C) |
| │───├─DTM Date/time/period | ×9 | (C) |
| │───├─MEA Measurements | ×9 | (C) |
| │───├─MOA Monetary amount | ×9 | (C) |
| │───├─PCD Percentage details | ×9 | (C) |
| │───├─QRS Query and response | ×9 | (C) |
| │───├─QTY Quantity | ×9 | (C) |
| │───├─RFF Reference | ×9 | (C) |
| │───├─FTX Free text | ×9 | (C) |
| │───├─Segment Group 18 | ×99 | (C) |
| │───│─├─TCC Charge/rate calculations | ×1 | (M) |
| │───│─├─IDE Identity | ×9 | (C) |
| │───│─├─ATT Attribute | ×9 | (C) |
| │───│─├─MOA Monetary amount | ×9 | (C) |
| │───│─├─PCD Percentage details | ×9 | (C) |
| │───│─├─FTX Free text | ×9 | (C) |
| │───│─└─Segment Group 19 | ×99 | (C) |
| │───│───├─COT Contribution details | ×1 | (M) |
| │───│───├─IDE Identity | ×9 | (C) |
| │───│───├─ATT Attribute | ×9 | (C) |
| │───│───├─MOA Monetary amount | ×9 | (C) |
| │───│───├─PCD Percentage details | ×5 | (C) |
| │───│───├─RFF Reference | ×9 | (C) |
| │───│───└─FTX Free text | ×9 | (C) |
| │───└─Segment Group 20 | ×99 | (C) |
| │─────├─IMD Item description | ×1 | (M) |
| │─────├─IDE Identity | ×9 | (C) |
| │─────├─ATT Attribute | ×9 | (C) |
| │─────├─DTM Date/time/period | ×9 | (C) |
| │─────├─MEA Measurements | ×9 | (C) |
| │─────├─PCD Percentage details | ×9 | (C) |
| │─────├─QRS Query and response | ×9 | (C) |
| │─────├─QTY Quantity | ×9 | (C) |
| │─────├─RFF Reference | ×9 | (C) |
| │─────├─FTX Free text | ×9 | (C) |
| │─────└─Segment Group 21 | ×9 | (C) |
| │───────├─TCC Charge/rate calculations | ×1 | (M) |
| │───────├─IDE Identity | ×9 | (C) |
| │───────├─ATT Attribute | ×9 | (C) |
| │───────├─MOA Monetary amount | ×9 | (C) |
| │───────├─PCD Percentage details | ×9 | (C) |
| │───────├─FTX Free text | ×9 | (C) |
| │───────└─Segment Group 22 | ×99 | (C) |
| │─────────├─COT Contribution details | ×1 | (M) |
| │─────────├─IDE Identity | ×9 | (C) |
| │─────────├─ATT Attribute | ×9 | (C) |
| │─────────├─MOA Monetary amount | ×9 | (C) |
| │─────────├─PCD Percentage details | ×9 | (C) |
| │─────────├─RFF Reference | ×9 | (C) |
| │─────────└─FTX Free text | ×9 | (C) |
| ├─Segment Group 23 | ×99 | (C) |
| │─├─PRC Process identification | ×1 | (M) |
| │─├─IDE Identity | ×9 | (C) |
| │─├─ATT Attribute | ×9 | (C) |
| │─├─DTM Date/time/period | ×99 | (C) |
| │─├─MOA Monetary amount | ×9 | (C) |
| │─├─QRS Query and response | ×99 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─└─FTX Free text | ×9 | (C) |
| ├─Segment Group 24 | ×99 | (C) |
| │─├─SEQ Sequence details | ×1 | (M) |
| │─├─IDE Identity | ×9 | (C) |
| │─├─ATT Attribute | ×9 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─└─Segment Group 25 | ×99 | (C) |
| │───├─COD Component details | ×1 | (M) |
| │───├─IDE Identity | ×9 | (C) |
| │───├─ATT Attribute | ×9 | (C) |
| │───├─DTM Date/time/period | ×9 | (C) |
| │───├─MOA Monetary amount | ×9 | (C) |
| │───├─QRS Query and response | ×9 | (C) |
| │───├─RFF Reference | ×9 | (C) |
| │───└─FTX Free text | ×9 | (C) |
| └─UNT Message trailer | ×1 | (M) |