|
This message is available for formal trial for at least six months from the date of approval by UN/ECE/TRADE/WP.4. Organisations are invited to trial this message. Comments on the results from the trial should be forwarded to their Rapporteur's Team Secretariat as soon as they are available. Based on the results of the trials, a UNSM may be issued. The segments, composite data elements, data elements and codes for use in the trial of this message are contained in the Draft directory. However, this information may differ from that in the Standard Directory (UNTDID), even for material having the same identifying tags. |
| Message Type: | IFTCCA |
|---|---|
| Version: | D |
| Release: | 94A |
| Contr. Agency: | UN |
| Status: | 1 |
| Revision: | 1 |
| Date: | 94-09-21 |
| SOURCE: | Western European EDIFACT Board |
|
For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction |
|
This message also occurs in the following versions of this standard: D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B |
This specification provides the definition of the Forwarding and transport shipment charge calculation message (IFTCCA) to be used in Electronic Data Interchange (EDI) between trading partners, involved in administration, commerce and transport.
The function of this message is to request the calculation of the transport charges of a specific shipment and to answer to such a request.
This message may be applied for both national and international trade. It is based on universal practice and is not dependent on the type of business or industry.
This message may be used:
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.
This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.
A service segment starting and uniquely identifying a message. The message type code for the Forwarding and transport shipment charge calculation message is IFTCCA.
Note: Forwarding and transport shipment charge calculation messages conforming to this document must contain the following data in segment UNH, composite S009:
| Data element | 0065 | IFTCCA |
| 0052 | D | |
| 0054 | 94A | |
| 0051 | UN |
A segment to indicate the type and function of the message and to transmit the identifying number.
A segment to identify a person or department to whom communication should be directed.
A segment to identify a communication number of a person or department to whom communication should be directed.
A segment to indicate date(s) and time(s) applying to the whole message.
A segment to identify the contract, conditions of carriage, services and priority requirements for the transport.
A segment to indicate the currency applicable to the whole message.
A segment to indicate a monetary value applying to the whole message.
A segment to specify free form or processable supplementary information. In computer-to-computer exchanges free form text will normally require the receiver to process this segment manually.
A segment to express a reference which applies to the entire message.
A segment to specify control totals for the shipment.
A group of segments to identify the routing and date(s)/time(s) of the calculation.
A segment to identify a location.
A segment to indicate date(s) and time(s) related to the location.
A group of segments to indicate the charge methodology which applies to the entire message.
A segment to indicate the default charge methodology.
A segment to indicate the charge calculation currency.
A segment to indicate a place related to the charge methodology.
A segment to identify the monetary amount associated with the charges, e.g. a maximum acceptable amount.
A group of segments to specify the transport calculation selection criteria.
A segment to indicate information related to the mode, means of transport and carrier.
A segment to indicate date(s) and time(s) related to the details of transport.
A segment to identify contract, conditions of carriage, services, priority requirements for this means of transport/carrier.
A segment to indicate a location related to the details of transport.
A segment to specify free form or processable supplementary information associated with the details of transport.
A group of segments to specify an additional reference and date(s) related to the means of transport/carrier.
A segment to identify a reference.
A segment to indicate date(s) and time(s) related to the reference.
A group of segments to identify a party, related references, locations and contacts.
A segment to identify the party's name, address and function.
A segment to indicate a location where a specific function will be performed.
A group of segments to identify a contact and its communication channels, related to the party.
A segment to identify a person or department within a party.
A segment to identify the communication numbers of person or department to whom communication should be directed.
A group of segments to specify references and date(s)/time(s) related to the party.
A segment to identify a reference used by the party.
A segment to indicate date(s) and time(s) related to the party.
SG12-SG13-SG15-SG17-SG18 A group of segments to describe the goods items for which the charges are calculated.
A segment to identify a goods item for which charges are calculated.
A segment to specify handling instructions relating to the goods item.
A segment to specify a temperature setting for the goods item.
A segment to specify a temperature range setting for the goods item.
A segment to identify a place/location relating to the goods item, e.g. the place where the goods item will be available for pick-up.
A segment to specify free form or processable additional information relating to the goods item.
A group of segments to identify and describe the goods.
A segment to describe the nature of cargo.
A segment to describe the goods in free form.
A group of segments to specify measurements applicable to the goods item.
A segment to specify measurements (weight and/or volume), other than dimensions, applicable to the goods item.
A segment to specify the number of units for which weights or volumes are expressed.
A group of segments to specify dimensions applicable to the goods item.
A segment to specify dimensions applicable to the goods item.
A segment to specify the number of units for which dimensions are expressed.
A group of segments to specify references related to the goods item.
A segment to specify a reference related to the goods item.
A segment to indicate the number of units for which the given reference applies.
A group of segments to identify transport details and related measurements for a goods item.
A segment to identify transport details for a goods item.
A group of segments to identify measurements.
A segment to specify the distribution of a goods item among the transport details.
A segment to indicate the number of units to which the given measurements apply.
A group of segments to specify the distribution of a goods item among the transport equipment.
A segment to identify equipment in which goods will be transported.
A group of segments to specify measurements of the split goods and the related number of equipment units.
A segment to specify the distribution of a goods item among the equipment.
A segment to indicate the number of equipment units to which the given measurements apply.
DTM-FTX A group of segments to specify charges associated with the goods item.
A segment to specify charges associated with the goods item.
A segment to specify price details (price and unit price basis).
A segment to specify the number of units to which the unit price basis applies.
A segment to indicate the applicable reduction or surcharge percentage details.
A segment to specify a monetary amount (prepaid, discount, etc.).
A segment to indicate a quantity, for example a chargeable weight.
A segment to indicate a location where a specific function will be performed.
A segment to specify a reference related to the calculated charge, e.g. reference to a specific contract.
A segment to specify measurements, e.g. minimum limit of weight for which the charge and price are applicable.
A segment to specify the currency in which the charge is expressed or must be expressed.
A segment to specify a date/time related to the charge calculation, e.g. the expire date of the calculation result.
A segment to specify free form additional information related with the charge calculation.
A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different goods classes.
A segment to specify the class of dangerous goods, packing group, etc.
A segment to specify the dangerous goods technical name and any other additional dangerous goods information.
A group of segments to identify dangerous goods measurements.
A segment to specify the measurements of the dangerous goods.
A segment to specify the number of equipment units to which the measurements apply.
A group of segments to specify the distribution of the dangerous goods among the transport equipment.
A segment to identify the equipment in which the dangerous goods have to be transported.
A group of segments to identify measurements of dangerous goods which are split.
A segment to specify measurements of that portion of the dangerous goods in the equipment.
A segment to specify the number of units to each of which the given measurement applies.
A group of segments to specify equipment in which goods must be transported.
A segment to specify equipment and/or equipment size and type.
A segment to specify the number of pieces of equipment required.
A segment to specify free form or processable supplementary information associated with the equipment.
A service segment ending the message, giving the total number of segments in the message and the control reference number of the message.
| BGM | Beginning of message | |
|
CNT | Control total |
| COM | Communication contact | |
| CPI | Charge payment instructions | |
| CTA | Contact information | |
| CUX | Currencies | |
| DGS | Dangerous goods | |
| DIM | Dimensions | |
| DTM | Date/time/period | |
| EQD | Equipment details | |
| EQN | Number of units | |
| FTX | Free text | |
| GDS | Nature of cargo | |
| GID | Goods item details | |
| HAN | Handling instructions | |
| LOC | Place/location identification | |
| MEA | Measurements | |
| MOA | Monetary amount | |
| NAD | Name and address | |
| PCD | Percentage details | |
| PRI | Price details | |
| QTY | Quantity | |
| RFF | Reference | |
| RNG | Range details | |
| SGP | Split goods placement | |
| TCC | Transport charge/rate calculations | |
| TDT | Details of transport | |
| TMP | Temperature | |
| TPL | Transport placement | |
| TSR | Transport service requirements | |
| UNH | Message header | |
| UNT | Message trailer |
| ├─UNH Message header | ×1 | (M) |
| ├─BGM Beginning of message | ×1 | (M) |
| ├─CTA Contact information | ×9 | (C) |
| ├─COM Communication contact | ×9 | (C) |
| ├─DTM Date/time/period | ×9 | (C) |
| ├─TSR Transport service requirements | ×9 | (C) |
| ├─CUX Currencies | ×9 | (C) |
| ├─MOA Monetary amount | ×9 | (C) |
| ├─FTX Free text | ×99 | (C) |
| ├─RFF Reference | ×9 | (C) |
| ├─CNT Control total | ×9 | (C) |
| ├─Segment Group 1 | ×99 | (C) |
| │─├─LOC Place/location identification | ×1 | (M) |
| │─└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 2 | ×9 | (C) |
| │─├─CPI Charge payment instructions | ×1 | (M) |
| │─├─CUX Currencies | ×9 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─└─MOA Monetary amount | ×9 | (C) |
| ├─Segment Group 3 | ×99 | (C) |
| │─├─TDT Details of transport | ×1 | (M) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─TSR Transport service requirements | ×9 | (C) |
| │─├─LOC Place/location identification | ×99 | (C) |
| │─├─FTX Free text | ×99 | (C) |
| │─└─Segment Group 4 | ×9 | (C) |
| │───├─RFF Reference | ×1 | (M) |
| │───└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 5 | ×99 | (C) |
| │─├─NAD Name and address | ×1 | (M) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─Segment Group 6 | ×9 | (C) |
| │─│─├─CTA Contact information | ×1 | (M) |
| │─│─└─COM Communication contact | ×9 | (C) |
| │─└─Segment Group 7 | ×9 | (C) |
| │───├─RFF Reference | ×1 | (M) |
| │───└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 8 | ×999 | (C) |
| │─├─GID Goods item details | ×1 | (M) |
| │─├─HAN Handling instructions | ×9 | (C) |
| │─├─TMP Temperature | ×9 | (C) |
| │─├─RNG Range details | ×9 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─Segment Group 9 | ×9 | (C) |
| │─│─├─GDS Nature of cargo | ×1 | (M) |
| │─│─└─FTX Free text | ×9 | (C) |
| │─├─Segment Group 10 | ×99 | (C) |
| │─│─├─MEA Measurements | ×1 | (M) |
| │─│─└─EQN Number of units | ×9 | (C) |
| │─├─Segment Group 11 | ×99 | (C) |
| │─│─├─DIM Dimensions | ×1 | (M) |
| │─│─└─EQN Number of units | ×9 | (C) |
| │─├─Segment Group 12 | ×9 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─EQN Number of units | ×9 | (C) |
| │─├─Segment Group 13 | ×9 | (C) |
| │─│─├─TPL Transport placement | ×1 | (M) |
| │─│─└─Segment Group 14 | ×9 | (C) |
| │─│───├─MEA Measurements | ×1 | (M) |
| │─│───└─EQN Number of units | ×9 | (C) |
| │─├─Segment Group 15 | ×999 | (C) |
| │─│─├─SGP Split goods placement | ×1 | (M) |
| │─│─└─Segment Group 16 | ×9 | (C) |
| │─│───├─MEA Measurements | ×1 | (M) |
| │─│───└─EQN Number of units | ×9 | (C) |
| │─├─Segment Group 17 | ×99 | (C) |
| │─│─├─TCC Transport charge/rate calculations | ×1 | (M) |
| │─│─├─PRI Price details | ×9 | (C) |
| │─│─├─EQN Number of units | ×9 | (C) |
| │─│─├─PCD Percentage details | ×9 | (C) |
| │─│─├─MOA Monetary amount | ×9 | (C) |
| │─│─├─QTY Quantity | ×9 | (C) |
| │─│─├─LOC Place/location identification | ×9 | (C) |
| │─│─├─RFF Reference | ×9 | (C) |
| │─│─├─MEA Measurements | ×9 | (C) |
| │─│─├─CUX Currencies | ×9 | (C) |
| │─│─├─DTM Date/time/period | ×9 | (C) |
| │─│─└─FTX Free text | ×9 | (C) |
| │─└─Segment Group 18 | ×9 | (C) |
| │───├─DGS Dangerous goods | ×1 | (M) |
| │───├─FTX Free text | ×99 | (C) |
| │───├─Segment Group 19 | ×9 | (C) |
| │───│─├─MEA Measurements | ×1 | (M) |
| │───│─└─EQN Number of units | ×1 | (C) |
| │───└─Segment Group 20 | ×999 | (C) |
| │─────├─SGP Split goods placement | ×1 | (M) |
| │─────└─Segment Group 21 | ×9 | (C) |
| │───────├─MEA Measurements | ×1 | (M) |
| │───────└─EQN Number of units | ×1 | (C) |
| ├─Segment Group 22 | ×999 | (C) |
| │─├─EQD Equipment details | ×1 | (M) |
| │─├─EQN Number of units | ×9 | (C) |
| │─└─FTX Free text | ×9 | (C) |
| └─UNT Message trailer | ×1 | (M) |
