|
This message is available for formal trial for at least six months from the date of approval by UN/ECE/TRADE/WP.4. Organisations are invited to trial this message. Comments on the results from the trial should be forwarded to their Rapporteur's Team Secretariat as soon as they are available. Based on the results of the trials, a UNSM may be issued. The segments, composite data elements, data elements and codes for use in the trial of this message are contained in the Draft directory. However, this information may differ from that in the Standard directory (UNTDID), even for material having the same identifying tags. |
| Message Type: | QALITY |
|---|---|
| Version: | D |
| Release: | 95B |
| Contr. Agency: | UN |
| Status: | 2 |
| Revision: | 3 |
| Date: | 95-07-07 |
| SOURCE: | Submitted by WEEB-MD1 on behalf of PAEB |
|
For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction |
|
This message also occurs in the following versions of this standard: D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B |
This specification provides the definition of the Quality data message (QALITY) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.
A message to enable the transmission of the results of tests performed to satisfy a specified product or process requirement. The content includes, but is not limited to, test data and measurements, statistical information, and the testing methods employed.
The UN Standard Quality Data Message may be applied for both national and international trade. It is based on universal commercial practice and is not dependent on the type of business or industry.
. a product/service, . a product via batch references, . process type information of a product.
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.
This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.
The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message:
All specified dates/times should be in the format 'yymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.)
Where a choice of code or text is given only the code element should be used wherever possible.
Conditional data that is not required in the message should not be included.
Care must be taken that the segment qualifier in dependent segments do not conflict with the segment qualifier of the trigger segment of a group.
Free text information within the message should be avoided as this inhibits automatic processing.
Information to be provided in the Header section:
A service segment starting and uniquely identifying a message. The message type code for the Quality data message is QALITY.
Note: Quality data messages conforming to this document must contain the following data in segment UNH, composite S009:
| Data element | 0065 | QALITY |
| 0052 | D | |
| 0054 | 95B | |
| 0051 | UN |
A segment by which the sender uniquely identifies the Quality Data Message by means of its type and number.
A segment specifying general dates and, when relevant, times related to the whole message. The segment must be specified at least once to identify the quality data message date.
Example of the use of this DTM-segment is : date/time frame of reported data that apply to the whole quality data message.
The Date/time/period segment within other segment groups should be used whenever the date/time/period requires to be logically related to another specified data item; e.g. date of measurement must be specified within the measurement segment group.
A segment for describing the product involved.
A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product.
A segment with free text information, in coded or clear form, to give further clarification, when required, to the whole message. In computer to computer exchanges such text will normally require the receiver to handle this segment manually.
A segment group for referencing documents and where necessary, their dates, relating to the whole message, e.g. purchase order, shipment/consignment number.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments identifying the parties relevant to the whole Quality Data Message, with associated information.
A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the whole Quality Data Message. Identification of the Sender and Receiver party is mandatory for the Quality Data Message. They are to be given in the NAD segment.
A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number.
A segment group giving references and where necessary, date information only relevant to the specified party.
A segment identifying the reference by its number and where appropriate a line number within a document.
A segment specifying the date and/or time of the reference. The specified date should be in 'yymmdd' format unless all parties agree that there is a functional requirement for an alternative format.
A group of segments giving contact details of the specific person or department within the party identified in the NAD segment.
A segment to identify a person or department, and their function, to whom communications should be directed.
A segment to identify a communication type and number for the contact specified in the CTA segment.
Information to be provided in the Detail section:
0190 Segment group 5: LIN-PIA-IMD-MEA-PSD-SPS-DTM-QTY-FTX-SG6-SG7- SG10-SG12-SG20-SG30 A group of segments providing the relevant quality data for the specified product.
A segment identifying the line item by its number and additionally, identifying the product involved by a product identification number. Other product identification numbers are specified in the following PIA segment, e.g. Customer part number, etc.
A segment providing additional product identification to that specified in the LIN segment, e.g. Buyer part number.
A segment for describing the product involved. This segment should be used for products that cannot be identified by a product code or article number.
A segment to allow physical measurements and dimensions to be stated, where this is required for identification of the product.
A segment to define the physical sample parameters, associated with a test, resulting in discrete measurements. If used in this position, the values apply to all following values of product properties.
A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values apply to all following values of product properties.
A segment specifying date/time/period details to the line item only. Any specified date should be in 'yymmdd' format unless all parties agree that there is a functional requirement for an alternative format.
A segment to enable quantity information to be specified.
A segment with free text in coded or clear form, to give further clarification, when required, for the line item. In computer to computer exchanges such text will normally require the receiver to handle this segment manually.
A segment group for referencing documents relating to the line item and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments identifying the parties with associated information, relevant to the line item only.
A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the line item.
A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number.
A segment group giving references and where necessary, date information only relevant to the specified party.
A segment identifying the reference by its number and where appropriate a line number within a document.
A segment specifying the date and/or time of the reference. The specified date should be in 'yymmdd' format unless all parties agree that there is a functional requirement for an alternative format.
A group of segments giving contact details of the specific person or department within the party identified in the NAD segment.
A segment to identify a person or department, and their function, to whom communications should be directed.
A segment to identify a communication type and number for the contact specified in the CTA segment.
A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates.
A segment to describe the nature of the test performed.
A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time.
A segment group of referencing documents relating to the test method and where necessary, their dates, e.g. device number.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified.
To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Property class, coded (7059) or Measurement dimension, coded (6313) or Characteristic identification (7037) must be present.
If Property class, coded (7059) AND Measurement dimension, coded (6313) are present, then Characteristic identification (7037) is not allowed.
If only Property class, coded is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments.
The data element Characteristic (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics.
NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions.
A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group.
A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed.
A segment with free text information to give further clarification within Segment group 12: the Analysis Group.
A segment group of referencing documents relating to the Analysis Section and where necessary, their dates, e.g. Purchase order, shipment note.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement Application Qualifier (6311) indicates the type of the values.
A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time.
A Segment group of referencing documents relating to the specifications and values and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to provide the necessary information for summary statistics with any related references and dates.
A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period.
A Segment group of referencing documents relating to the statistics and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates.
A segment to describe the nature of the test performed.
A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier.
A Segment group of referencing documents relating to the test method and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to enable batch related information to be specified.
A segment providing specific serial or batch numbers, relating to the specified product. These may be single numbers or ranges of numbers.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier., e.g. batch process date.
A Segment group of referencing documents relating to the batch and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified.
To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Property class, coded (7059) or Measurement dimension, coded (6313) or Characteristic identification (7037) must be present.
If Property class, coded (7059) AND Measurement dimension, coded (6313) are present, then Characteristic identification (7037) is not allowed.
If only Property class, coded is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments.
The data element Characteristic (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics.
NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions.
A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group.
A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed.
A segment with free text information to give further clarification within Segment group 22: the Analysis Group.
A segment group of referencing documents relating to the Analysis Section and where necessary, their dates, e.g. Purchase order, shipment note.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement Application Qualifier (6311) indicates the type of the values.
A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time.
A Segment group of referencing documents relating to the specifications and values and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to provide the necessary information for summary statistics with any related references and dates.
A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period.
A Segment group of referencing documents relating to the statistics and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates.
A segment to describe the nature of the test performed.
A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier.
A Segment group of referencing documents relating to the test method and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to allow process related quality data to be specified.
A segment to specify the process/sub-process type and description to which the data is related.
A group of segments identifying Names, Addresses and Locations relevant to the process.
A segment identifying names and addresses of parties, in coded or clear form, and their function relevant for the process.
A segment indicating more details regarding specific locations related to the party specified in the NAD- segment, e.g. internal site/building number.
A group of segments to be used to define a class of properties, the individual properties within that class and the related data (e.g. discrete values, statistical information, test methods). When this segment group is used, the data is directly related to the product specified.
To specify the general class and/or the individual properties on which the Quality Data is being reported. Note: within the CCI-segment Property class, coded (7059) or Measurement dimension, coded (6313) or Characteristic identification (7037) must be present.
If Property class, coded (7059) AND Measurement dimension, coded (6313) are present, then Characteristic identification (7037) is not allowed.
If only Property class, coded is used within the CCI-segment, then the individual properties must be specified within the related STA/MEA-segments.
The data element Characteristic (7036) should only be used to enhance the meaning of the code value (e.g. if no specific code available and code value ZZ (mutually defined) is used then Description can be used to further describe the Product Characteristics.
NB: The Class identification element in this segment is only used to specify the product characteristic class, e.g. Chemistry or Physical Dimensions.
A segment to define the physical sample parameters associated with a test resulting in discrete measurements. If used in this position, the values only apply to data within the same analysis group.
A segment to define the sampling parameters associated with summary statistics reported. If used in this position, the values only apply to data within the same analysis group.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. date/time, test performed.
A segment with free text information to give further clarification within Segment group 32: the Analysis Group.
A segment group of referencing documents relating to the Analysis Section and where necessary, their dates, e.g. Purchase order, shipment note.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to allow measurement values or specification values to be specified along with their associated references and dates. The data element Measurement Application Qualifier (6311) indicates the type of the values.
A segment to specify discrete values, other measurement results or specification values. These values may be specified as a range and may be qualified by the significance and/or the attribute codes.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. test date/time.
A Segment group of referencing documents relating to the specifications and values and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to provide the necessary information for summary statistics with any related references and dates.
A segment to specify the values required for statistics including codes to define the type of statistics and the measure unit employed.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier, e.g. time frame of statistical period.
A Segment group of referencing documents relating to the statistics and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A group of segments to provide details of the test methods, employed including any circumstances, test devices, references and dates.
A segment to describe the nature of the test performed.
A segment to provide the necessary values of the various circumstances related to the tests, e.g. temperature reading when test performed.
A segment specifying the date, and when relevant, the time of an activity identified by the date/time qualifier.
A Segment group of referencing documents relating to the test method and where necessary, their dates.
A segment identifying the referenced document by its number and where appropriate, a line number within that document.
A segment specifying the date/time of the referenced document. The specified date should be in 'yymmdd' format, unless all parties agree that there is a functional requirement for an alternative format.
A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.
| BGM | Beginning of message | |
| CCI | Characteristic/class id | |
| COM | Communication contact | |
| CTA | Contact information | |
| DTM | Date/time/period | |
| FTX | Free text | |
| GIN | Goods identity number | |
| IMD | Item description | |
| LIN | Line item | |
| LOC | Place/location identification | |
| MEA | Measurements | |
| NAD | Name and address | |
| PIA | Additional product id | |
| PRC | Process identification | |
| PSD | Physical sample description | |
| QTY | Quantity | |
| RFF | Reference | |
| SPS | Sampling parameters for summary statistics | |
| STA | Statistics | |
| TEM | Test method | |
| UNH | Message header | |
| UNT | Message trailer |
| ├─UNH Message header | ×1 | (M) |
| ├─BGM Beginning of message | ×1 | (M) |
| ├─DTM Date/time/period | ×10 | (M) |
| ├─IMD Item description | ×10 | (C) |
| ├─MEA Measurements | ×10 | (C) |
| ├─FTX Free text | ×5 | (C) |
| ├─Segment Group 1 | ×10 | (C) |
| │─├─RFF Reference | ×1 | (M) |
| │─└─DTM Date/time/period | ×2 | (C) |
| ├─Segment Group 2 | ×10 | (C) |
| │─├─NAD Name and address | ×1 | (M) |
| │─├─LOC Place/location identification | ×5 | (C) |
| │─├─Segment Group 3 | ×10 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×2 | (C) |
| │─└─Segment Group 4 | ×5 | (C) |
| │───├─CTA Contact information | ×1 | (M) |
| │───└─COM Communication contact | ×5 | (C) |
| ├─Segment Group 5 | ×200 | (C) |
| │─├─LIN Line item | ×1 | (M) |
| │─├─PIA Additional product id | ×10 | (C) |
| │─├─IMD Item description | ×10 | (C) |
| │─├─MEA Measurements | ×10 | (C) |
| │─├─PSD Physical sample description | ×1 | (C) |
| │─├─SPS Sampling parameters for summary statistics | ×1 | (C) |
| │─├─DTM Date/time/period | ×10 | (C) |
| │─├─QTY Quantity | ×99 | (C) |
| │─├─FTX Free text | ×5 | (C) |
| │─├─Segment Group 6 | ×10 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×2 | (C) |
| │─├─Segment Group 7 | ×10 | (C) |
| │─│─├─NAD Name and address | ×1 | (M) |
| │─│─├─LOC Place/location identification | ×5 | (C) |
| │─│─├─Segment Group 8 | ×10 | (C) |
| │─│─│─├─RFF Reference | ×1 | (M) |
| │─│─│─└─DTM Date/time/period | ×2 | (C) |
| │─│─└─Segment Group 9 | ×5 | (C) |
| │─│───├─CTA Contact information | ×1 | (M) |
| │─│───└─COM Communication contact | ×5 | (C) |
| │─├─Segment Group 10 | ×100 | (C) |
| │─│─├─TEM Test method | ×1 | (M) |
| │─│─├─MEA Measurements | ×100 | (C) |
| │─│─├─DTM Date/time/period | ×10 | (C) |
| │─│─└─Segment Group 11 | ×10 | (C) |
| │─│───├─RFF Reference | ×1 | (M) |
| │─│───└─DTM Date/time/period | ×2 | (C) |
| │─├─Segment Group 12 | ×200 | (C) |
| │─│─├─CCI Characteristic/class id | ×1 | (M) |
| │─│─├─PSD Physical sample description | ×10 | (C) |
| │─│─├─SPS Sampling parameters for summary statistics | ×10 | (C) |
| │─│─├─DTM Date/time/period | ×10 | (C) |
| │─│─├─FTX Free text | ×10 | (C) |
| │─│─├─Segment Group 13 | ×10 | (C) |
| │─│─│─├─RFF Reference | ×1 | (M) |
| │─│─│─└─DTM Date/time/period | ×2 | (C) |
| │─│─├─Segment Group 14 | ×999 | (C) |
| │─│─│─├─MEA Measurements | ×1 | (M) |
| │─│─│─├─DTM Date/time/period | ×10 | (C) |
| │─│─│─└─Segment Group 15 | ×10 | (C) |
| │─│─│───├─RFF Reference | ×1 | (M) |
| │─│─│───└─DTM Date/time/period | ×2 | (C) |
| │─│─├─Segment Group 16 | ×100 | (C) |
| │─│─│─├─STA Statistics | ×1 | (M) |
| │─│─│─├─DTM Date/time/period | ×10 | (C) |
| │─│─│─└─Segment Group 17 | ×10 | (C) |
| │─│─│───├─RFF Reference | ×1 | (M) |
| │─│─│───└─DTM Date/time/period | ×2 | (C) |
| │─│─└─Segment Group 18 | ×100 | (C) |
| │─│───├─TEM Test method | ×1 | (M) |
| │─│───├─MEA Measurements | ×100 | (C) |
| │─│───├─DTM Date/time/period | ×10 | (C) |
| │─│───└─Segment Group 19 | ×10 | (C) |
| │─│─────├─RFF Reference | ×1 | (M) |
| │─│─────└─DTM Date/time/period | ×2 | (C) |
| │─├─Segment Group 20 | ×100 | (C) |
| │─│─├─GIN Goods identity number | ×1 | (M) |
| │─│─├─DTM Date/time/period | ×10 | (C) |
| │─│─├─Segment Group 21 | ×10 | (C) |
| │─│─│─├─RFF Reference | ×1 | (M) |
| │─│─│─└─DTM Date/time/period | ×2 | (C) |
| │─│─└─Segment Group 22 | ×200 | (C) |
| │─│───├─CCI Characteristic/class id | ×1 | (M) |
| │─│───├─PSD Physical sample description | ×10 | (C) |
| │─│───├─SPS Sampling parameters for summary statistics | ×10 | (C) |
| │─│───├─DTM Date/time/period | ×10 | (C) |
| │─│───├─FTX Free text | ×10 | (C) |
| │─│───├─Segment Group 23 | ×10 | (C) |
| │─│───│─├─RFF Reference | ×1 | (M) |
| │─│───│─└─DTM Date/time/period | ×2 | (C) |
| │─│───├─Segment Group 24 | ×999 | (C) |
| │─│───│─├─MEA Measurements | ×1 | (M) |
| │─│───│─├─DTM Date/time/period | ×10 | (C) |
| │─│───│─└─Segment Group 25 | ×10 | (C) |
| │─│───│───├─RFF Reference | ×1 | (M) |
| │─│───│───└─DTM Date/time/period | ×2 | (C) |
| │─│───├─Segment Group 26 | ×100 | (C) |
| │─│───│─├─STA Statistics | ×1 | (M) |
| │─│───│─├─DTM Date/time/period | ×10 | (C) |
| │─│───│─└─Segment Group 27 | ×10 | (C) |
| │─│───│───├─RFF Reference | ×1 | (M) |
| │─│───│───└─DTM Date/time/period | ×2 | (C) |
| │─│───└─Segment Group 28 | ×100 | (C) |
| │─│─────├─TEM Test method | ×1 | (M) |
| │─│─────├─MEA Measurements | ×100 | (C) |
| │─│─────├─DTM Date/time/period | ×10 | (C) |
| │─│─────└─Segment Group 29 | ×10 | (C) |
| │─│───────├─RFF Reference | ×1 | (M) |
| │─│───────└─DTM Date/time/period | ×2 | (C) |
| │─└─Segment Group 30 | ×100 | (C) |
| │───├─PRC Process identification | ×1 | (M) |
| │───├─Segment Group 31 | ×10 | (C) |
| │───│─├─NAD Name and address | ×1 | (M) |
| │───│─└─LOC Place/location identification | ×5 | (C) |
| │───└─Segment Group 32 | ×200 | (C) |
| │─────├─CCI Characteristic/class id | ×1 | (M) |
| │─────├─PSD Physical sample description | ×10 | (C) |
| │─────├─SPS Sampling parameters for summary statistics | ×10 | (C) |
| │─────├─DTM Date/time/period | ×10 | (C) |
| │─────├─FTX Free text | ×10 | (C) |
| │─────├─Segment Group 33 | ×10 | (C) |
| │─────│─├─RFF Reference | ×1 | (M) |
| │─────│─└─DTM Date/time/period | ×2 | (C) |
| │─────├─Segment Group 34 | ×999 | (C) |
| │─────│─├─MEA Measurements | ×1 | (M) |
| │─────│─├─DTM Date/time/period | ×10 | (C) |
| │─────│─└─Segment Group 35 | ×10 | (C) |
| │─────│───├─RFF Reference | ×1 | (M) |
| │─────│───└─DTM Date/time/period | ×2 | (C) |
| │─────├─Segment Group 36 | ×100 | (C) |
| │─────│─├─STA Statistics | ×1 | (M) |
| │─────│─├─DTM Date/time/period | ×10 | (C) |
| │─────│─└─Segment Group 37 | ×10 | (C) |
| │─────│───├─RFF Reference | ×1 | (M) |
| │─────│───└─DTM Date/time/period | ×2 | (C) |
| │─────└─Segment Group 38 | ×100 | (C) |
| │───────├─TEM Test method | ×1 | (M) |
| │───────├─MEA Measurements | ×100 | (C) |
| │───────├─DTM Date/time/period | ×10 | (C) |
| │───────└─Segment Group 39 | ×10 | (C) |
| │─────────├─RFF Reference | ×1 | (M) |
| │─────────└─DTM Date/time/period | ×2 | (C) |
| └─UNT Message trailer | ×1 | (M) |